--part0_912361368_boundary
Content-ID: <0_912361368@inet_out.mail.aol.com.1>
Content-type: text/plain; charset=US-ASCII
I thought the folks on the Potter list might be interested to know that the
CDI furler MiniSST has been discontinued and replaced by the the FF1 model.
The following is a letter I received from CDI (http://www.sailcdi.com/)
following my inquiry.
--part0_912361368_boundary
Content-ID: <0_912361368@inet_out.mail.shore.net.2>
Content-type: message/rfc822
Content-transfer-encoding: 7bit
Content-disposition: inline
Return-Path: <sailcdi@shore.net>
Received: from rly-zb03.mx.aol.com (rly-zb03.mail.aol.com [172.31.41.3]) by
air-zb01.mail.aol.com (v51.29) with SMTP; Sun, 29 Nov 1998 11:45:09
1900
Received: from siren.shore.net (siren.shore.net [207.244.124.5])
by rly-zb03.mx.aol.com (8.8.8/8.8.5/AOL-4.0.0)
with ESMTP id LAA29400 for <jblumhorst@aol.com>;
Sun, 29 Nov 1998 11:45:06 -0500 (EST)
From: sailcdi@shore.net
Received: from shell1.shore.net (northshore.shore.net) [192.233.85.1] (root)
by siren.shore.net with esmtp (Exim)
for jblumhorst@aol.com
id 0zk9y3-0000GD-00; Sun, 29 Nov 1998 11:45:03 -0500
Received: from packard-bell (mnchma-01-82.port.shore.net [204.167.111.82])
by northshore.shore.net (8.8.7/8.8.7) with SMTP id LAA00794
for <jblumhorst@aol.com>; Sun, 29 Nov 1998 11:45:02 -0500 (EST)
Message-Id: <3.0.3.32.19981129114130.006a1668@shell1.shore.net>
X-Sender: sailcdi@shell1.shore.net
X-Mailer: QUALCOMM Windows Eudora Light Version 3.0.3 (32)
Date: Sun, 29 Nov 1998 11:41:30 +0000
To: jblumhorst@aol.com
Subject: FF1 or MiniST
Mime-Version: 1.0
Content-type: text/plain; charset=US-ASCII
Content-transfer-encoding: 7bit
Dear Ms. Blumhorst:
Thanks for visiting our web site. I understand you are looking at furlers
for your West Wight Potter 19 and you would like to know the difference
between the MiniST and the FF1. Both systems are reefing / furling
systems. The FF1 was introduced last February and it replaces the MiniST
in our product line. The FF1 has a new larger (in width) luff extrusion
than the MiniST. The new extrusion also has two grooves which makes
handling the internal halyard easier than the one groove of the MiniST.
The FF1 spool is also a new design from the MiniST.
The FF1 has the same price as the MiniST, $375.
I hope this answers your questions.
Best regards,
Julie Femino
--part0_912361368_boundary--