Oops. I forgot to tell you how to slide the CDI unit up. There's a long
clevis pin with a ring in it going sideways thru the black plastic drum.
It's up at the top, just an inch or so below where the grey luff extrusion
goes into the black plastic drum. If you remove the pin, you can slide the
drum up on the extrusion, exposing the turnbuckle inside the drum. Make
sure there are cotter pins in the turnbuckle; you'd hate to see your
forestay come down because the turnbuckle came "unbuckled" !
Judy B
-----Original Message-----
From: Judith Franklin Blumhorst, DC [mailto:DrJudyB@pacbell.net]
Sent: Monday, May 01, 2000 1:40 PM
To: WWPotter@egroups.com
Subject: RE: [WWP] P-19 Forestay Adjustment
Hi Bruce,
You should be able to slide the CDI unit up and take a look at the forestay.
There should be a 10" turnbuckle inside the drum, if the installation was
done correctly.
<<snipped>>
[Non-text portions of this message have been removed]
------------------------------------------------------------------------
You have a voice mail message waiting for you at iHello.com:
http://click.egroups.com/1/3555/3/_/917698/_/957297939/
------------------------------------------------------------------------
Post: WWPotter@egroups.com
Help: WWPotter-owner@egroups.com
This archive was generated by hypermail 2b29 : Wed May 17 2000 - 03:27:07 PDT