----- Original Message -----
From: <Buflobrain@aol.com>
To: <wwpotter@tscnet.com>
Sent: Tuesday, June 08, 1999 3:41 AM
Subject: rigging
> - - - - - - - - - - - - - - - - - - - - - - - - - - -
> West Wight Potter Website at URL
> http://www.lesbois.com/wwpotter/
> - - - - - - - - - - - - - - - - - - - - - - - - - - -
> Dunked Hull 1075 into Kentucky Lake this weekend for 2 days. Wind was
light
> and sun was bright.
> I set the side shrouds to the fourth hole on the stock adjustment clip on
the
> hull. However, there still seemed to be considerable slack on the
downwind
> shroud during the sail. This is probably an impossible question, but is
> there any rule of thumb on these shroud adjustments? P15.
>
I wouldn't worry about it. On my Challenger 32 the shrouds always had some
slack on the lee side. You don't want them too tight or you may cause other
problems.
Regards
"YKnot"
P-14
267