- - - - - - - - - - - - - - - - - - - - - - - - - - -
West Wight Potter Mailing List maintainer
dfarrell@ridgecrest.ca.us
List hosted by www.tscnet.com
- - - - - - - - - - - - - - - - - - - - - - - - - - -
Hmm...sounds viable solar fry...but....will the slides be at the right
location to facilitate the hatch movement? Lots to think about...
Ken Silverman
On Wed, 15 Mar 2000 SolarFry@aol.com wrote:
> Why don't you get a piece of wood and use it to fill in that 3/8". It's
> easier to shape a separate piece of wood for a filler than to sand your brand
> new slides. A little epoxy with wood residue from the sanding can be used to
> glue it in place.
>
> Best
> SF
>
>
> In a message dated 3/14/00 1:51:13 PM Pacific Standard Time, hapilife@efn.org
> writes:
>
> << One challenge: the slides ae straight and the coach roof is curved. I
> spoke with Bruce at IM and he recommended using a belt sander to shape to
> fit. I measured. The gap in the middle is around 3/8"...seems like a lot
> to sand off!
>
> Perhaps they can be bent somewhat to conform to the shape...we'll see. As
> usual I am thinking a lot about this before I DO anything..
>
> Anyone have any ideas/comments? All are appreciated...
> Ken Silverman, poop-15, "Vegan Lorax", Bothell, Washington
> >>
>
This archive was generated by hypermail 2b29 : Fri Mar 31 2000 - 03:27:11 PST